Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 23Dec2013]


============================= Boot Info Summary: ===============================

 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda.
 => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    in partition 112 for .
 => Grub2 (v1.99) is installed in the MBR of /dev/sdc and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    in partition 112 for .
 => Grub2 (v1.99) is installed in the MBR of /dev/sdd and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    in partition 112 for .

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04.1 LTS 
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sdb3: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb4: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdc1: __________________________________________________________________________

    File system:       ext3
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdc2: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdc3: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdc4: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sdc5: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdd1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.05 20130620
    Boot sector info:  Syslinux looks at sector 2619520 of /dev/sdd1 for its 
                       second stage. SYSLINUX is installed in the 
                       /boot/syslinux directory. No errors found in the Boot 
                       Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/menu.lst /boot/grub/grub.cfg 
                       /boot/syslinux/syslinux.cfg /EFI/BOOT/grubx64.efi 
                       /gparted1/EFI/boot/bootia32.efi 
                       /gparted1/EFI/boot/bootx64.efi 
                       /boot/grub/i386-pc/core.img /boot/syslinux/ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1   625,142,447   625,142,447  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048   307,202,047   307,200,000 Data partition (Windows/Linux)
/dev/sda2     307,202,048   409,602,047   102,400,000 EFI System partition

Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 60.0 GB, 60022480896 bytes
255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb2    *          2,048    60,631,039    60,628,992  83 Linux
/dev/sdb3          60,635,136   100,354,047    39,718,912  83 Linux
/dev/sdb4         100,354,048   117,229,567    16,875,520  82 Linux swap / Solaris


Drive: sdc _____________________________________________________________________

Disk /dev/sdc: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1          20,482,048   122,882,047   102,400,000  83 Linux
/dev/sdc2               2,048    20,482,047    20,480,000  82 Linux swap / Solaris
/dev/sdc3         122,882,048   225,282,047   102,400,000  83 Linux
/dev/sdc4         225,282,048   976,773,119   751,491,072   5 Extended
/dev/sdc5         225,284,096   430,084,095   204,800,000  83 Linux


Drive: sdd _____________________________________________________________________

Disk /dev/sdd: 32.3 GB, 32326663680 bytes
255 heads, 63 sectors/track, 3930 cylinders, total 63138015 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdd1    *             63    42,430,463    42,430,401   c W95 FAT32 (LBA)


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              iso9660    Ubuntu 14.04.1 LTS amd64
/dev/loop1                                              squashfs   
/dev/sda1        ce04715b-9a3a-418a-98cd-0ea46c1d3558   ext4       
/dev/sda2        d4215a51-4d17-45ef-bf35-a61b8fa927b4   ext4       
/dev/sdb2        a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5   ext4       
/dev/sdb3        e2ebf923-e9a4-4c20-93d3-e1830226842e   ext4       
/dev/sdb4        1fb6bce6-e122-490b-add5-1b6d874fc267   swap       
/dev/sdc1        abb509cb-c5fc-4729-83f3-a22b3fa87f6c   ext3       
/dev/sdc2        fbc64995-acbc-4013-8ef5-57e8a496d4cf   swap       
/dev/sdc3        b1e83165-7ef6-4cc1-997c-42661a897f47   ext4       OpenSUSE
/dev/sdc5        97b14d56-18ff-4acf-bfe2-f89d1e970518   ext4       
/dev/sdd1        26C0-C39E                              vfat       MULTISYSTEM

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /cdrom                   iso9660    (ro,noatime)
/dev/loop1       /rofs                    squashfs   (ro,noatime)
/dev/sdd1        /isodevice               vfat       (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


=========================== sdb2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd1,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2  a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5
else
  search --no-floppy --fs-uuid --set=root a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=cs_CZ
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=-1
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 45,51,53; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2  a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5
	else
	  search --no-floppy --fs-uuid --set=root a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5
	fi
	linux	/boot/vmlinuz-3.13.0-36-generic root=UUID=a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-36-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5' {
	menuentry 'Ubuntu, with Linux 3.13.0-36-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-36-generic-advanced-a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2  a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5
		else
		  search --no-floppy --fs-uuid --set=root a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5
		fi
		echo	'Loading Linux 3.13.0-36-generic ...'
		linux	/boot/vmlinuz-3.13.0-36-generic root=UUID=a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5 ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.13.0-36-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-36-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-36-generic-recovery-a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2  a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5
		else
		  search --no-floppy --fs-uuid --set=root a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5
		fi
		echo	'Loading Linux 3.13.0-36-generic ...'
		linux	/boot/vmlinuz-3.13.0-36-generic root=UUID=a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.13.0-36-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-advanced-a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2  a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5
		else
		  search --no-floppy --fs-uuid --set=root a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5
		fi
		echo	'Loading Linux 3.13.0-32-generic ...'
		linux	/boot/vmlinuz-3.13.0-32-generic root=UUID=a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5 ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.13.0-32-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-recovery-a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd1,msdos2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2  a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5
		else
		  search --no-floppy --fs-uuid --set=root a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5
		fi
		echo	'Loading Linux 3.13.0-32-generic ...'
		linux	/boot/vmlinuz-3.13.0-32-generic root=UUID=a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.13.0-32-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2  a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5
	else
	  search --no-floppy --fs-uuid --set=root a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd1,msdos2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2  a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5
	else
	  search --no-floppy --fs-uuid --set=root a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb2 during installation
UUID=a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5 /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda1 during installation
UUID=ce04715b-9a3a-418a-98cd-0ea46c1d3558 /home           ext4    defaults        0       2
# swap was on /dev/sdb4 during installation
UUID=1fb6bce6-e122-490b-add5-1b6d874fc267 none            swap    sw              0       0
# swap was on /dev/sdc2 during installation
UUID=fbc64995-acbc-4013-8ef5-57e8a496d4cf none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sdb2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)


=========================== sdd1/boot/grub/menu.lst: ===========================

--------------------------------------------------------------------------------
# This is a sample menu.lst file. You should make some changes to it.
# The old install method of booting via the stage-files has been removed.
# Please install GRLDR boot strap code to MBR with the bootlace.com
# utility under DOS/Win9x or Linux.

timeout 30
default /default
#convert -resize 640x480 -colors 14 /media/multisystem/boot/splash/splash.png /media/multisystem/boot/splash/splash.xpm.gz
splashimage=/boot/splash/splash.xpm.gz
#color blue/green yellow/red white/magenta white/magenta
foreground=0033FF
background=FF3300

#http://diddy.boot-land.net/grub4dos/Grub4dos.htm
#http://www.boot-land.net/forums/index.php?showforum=66
#http://diddy.boot-land.net/grub4dos/files/syntax.htm
#Ne supprimez pas ce marqueur! / Do not remove this marker!
#MULTISYSTEM_START
#MULTISYSTEM_STOP
#Ne supprimez pas ce marqueur! / Do not remove this marker!
#http://diddy.boot-land.net/grub4dos/files/syntax.htm

title Chainloader into GRUB 2
find --set-root /boot/grub/boot.img
chainloader /boot/grub/boot.img
boot

#title Chainloader into Syslinux
#map (hd0) (hd0)
#map (hd0) (hd0)
#chainloader (hd0,0)+1
#rootnoverify (hd0,0)

##Autre solution pour chainer Syslinux
##faire une copie du mbr de la clé USB
##dd if=/dev/sd?1 of=/media/multisystem/syslinux.mbr bs=512 count=1
#title Chainloader into Syslinux
#find --set-root --ignore-floppies --ignore-cd /syslinux.mbr
#map (hd0) (hd0)
#map (hd0) (hd0)
#map --rehook
#find --set-root --ignore-floppies --ignore-cd /syslinux.mbr
#chainloader /syslinux.mbr

##Autre solution pour chainer Syslinux
#title Chainloader into Syslinux
#find --set-root /boot/syslinux/ldlinux.sys
#chainloader /boot/syslinux/ldlinux.sys

##Autre solution pour chainer Syslinux
#title Chainloader into Syslinux
#find --set-root --ignore-floppies --ignore-cd /boot/syslinux/redir.img
#kernel /boot/syslinux/memdisk
#initrd /boot/syslinux/redir.img

#http://www.ibiblio.org/pub/micro/pc-stuff/freedos/files/distributions/
title FreeDos
kernel /boot/syslinux/memdisk
initrd /boot/img/fdboot.img

title find and load NTLDR of Windows NT/2K/XP
fallback 1
find --set-root --ignore-floppies --ignore-cd /ntldr
map () (hd0)
map (hd0) ()
map --rehook
find --set-root --ignore-floppies --ignore-cd /ntldr
chainloader /ntldr
savedefault --wait=2

title find and load BOOTMGR of Windows VISTA/SEVEN
fallback 2
find --set-root --ignore-floppies --ignore-cd /bootmgr
map () (hd0)
map (hd0) ()
map --rehook
find --set-root --ignore-floppies --ignore-cd /bootmgr
chainloader /bootmgr
savedefault --wait=2

title find and load CMLDR, the Recovery Console of Windows NT/2K/XP
fallback 3
find --set-root --ignore-floppies --ignore-cd /cmldr
map () (hd0)
map (hd0) ()
map --rehook
find --set-root --ignore-floppies --ignore-cd /cmldr
chainloader /cmldr
#####################################################################
# write string "cmdcons" to memory 0000:7C03 in 2 steps:
#####################################################################
# step 1. Write 4 chars "cmdc" at 0000:7C03
write 0x7C03 0x63646D63
# step 2. Write 3 chars "ons" and an ending null at 0000:7C07
write 0x7C07 0x00736E6F
savedefault --wait=2

title find and load IO.SYS of Windows 9x/Me
fallback 4
find --set-root /io.sys
chainloader /io.sys
savedefault --wait=2

title find and boot 0PE.ISO
fallback 5
find --set-root /0PE/0PE.ISO
map /0PE/0PE.ISO (0xff) || map --mem /0PE/0PE.ISO (0xff)
map --hook
chainloader (0xff)
savedefault --wait=2

title find and boot MicroPE.ISO
fallback 6
find --set-root /boot/MicroPE.ISO
map /boot/MicroPE.ISO (0xff) || map --mem /boot/MicroPE.ISO (0xff)
map --hook
chainloader (0xff)
savedefault --wait=2

title find and boot ubcd.iso
fallback 8
find --set-root /ubcd.iso
map /ubcd.iso (0xff) || map --mem /ubcd.iso (0xff)
map --hook
chainloader (0xff)
savedefault --wait=2

title commandline
commandline

title reboot
reboot

title halt
halt
--------------------------------------------------------------------------------

=========================== sdd1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#insmod gpt
#insmod pc
#insmod gfxmenu
#
#insmod videotest
insmod tga
insmod png
insmod gfxterm
insmod lspci
#insmod vbeinfo
insmod vbe
insmod ntfs
insmod chain
insmod biosdisk
insmod font
#http://grub.enbug.org/ThemeFormat
#http://grub.gibibit.com/Theme_format#colors
#http://code.google.com/p/burg/wiki/InstallUbuntu
#http://code.google.com/p/burg/downloads/list
#http://ubuntuforums.org/showthread.php?t=1195275
#pour acces a grub2 du bootloader principal modifier dans fichier: /etc/default/grub
#GRUB_HIDDEN_TIMEOUT=10 #0 par defaut
#GRUB_HIDDEN_TIMEOUT_QUIET=false #true d'origine
#sudo update-grub
#echo -n "Press ESC to see the menu... "
#if sleep --verbose --interruptible 5 ; then
#set timeout=10
#fi
set default=0
set timeout=10
set fallback=1
search --no-floppy --fs-uuid --set=root 26C0-C39E
set root=${root}
#http://grub.enbug.org/gfxterm
if loadfont /boot/polices/unicode.pf2 ; then
set gfxmode=640x480
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
#set gfxmode=auto
#set gfxpayload=keep
fi
fi
#set locale_dir=/boot/grub/locale
#set lang=en
#insmod gettext
if background_image /boot/splash/splash.png ; then
#text no sel/fond ecran
set color_normal=white/black #1
#text sel/fond ecran sel
set color_highlight=green/white #1
else
set menu_color_normal=white/black #2
set menu_color_highlight=green/white #2
set color_normal=white/magenta #2
set color_highlight=green/white #2
fi
#set gfxpayload="1280x1024,1024x768,800x600,640x480"
#set gfxpayload=keep
#Ne supprimez pas ce marqueur! / Do not remove this marker!
#MULTISYSTEM_START
#MULTISYSTEM_MENU_DEBUT|08-03-2014-21:52:01-976747347|debian1|multisystem-debian|1214Mio|
menuentry "Debian Wheezy kde live amd64" {
linux /debian1/live/vmlinuz root=UUID=26C0-C39E live-media-path=/debian1/live boot=live config quiet splash
initrd /debian1/live/initrd.img
}
menuentry "Debian Wheezy kde Live amd64 (failsafe)" {
linux /debian1/live/vmlinuz root=UUID=26C0-C39E live-media-path=/debian1/live boot=live config memtest noapic noapm nodma nomce nolapic nomodeset nosmp nosplash vga=normal
initrd /debian1/live/initrd.img
}
menuentry "Debian Wheezy kde amd64 Text-mode install" {
linux /debian1/install/vmlinuz root=UUID=26C0-C39E cdrom-detect/try-usb=true quiet
initrd /debian1/install/initrd.gz
}
menuentry "Debian Wheezy kde amd64 Graphical install" {
linux /debian1/install/gtk/vmlinuz root=UUID=26C0-C39E cdrom-detect/try-usb=true quiet
initrd /debian1/install/gtk/initrd.gz
}
#MULTISYSTEM_MENU_FIN|08-03-2014-21:52:01-976747347|debian1|multisystem-debian|1214Mio|
#MULTISYSTEM_MENU_DEBUT|08-03-2014-21:58:53-551298420|fedora1|multisystem-fedora|951Mio|
menuentry "Fedora-Live-Desktop-x86_64-19-1.iso" {
linux /fedora1/isolinux/vmlinuz0 live_locale=cs_CZ.UTF-8 live_keytable=cz live_dir=/fedora1 root=UUID=26C0-C39E rootfstype=auto ro rd.live.image quiet  rhgb rd.luks=0 rd.md=0 rd.dm=0
initrd /fedora1/isolinux/initrd0.img
}
#MULTISYSTEM_MENU_FIN|08-03-2014-21:58:53-551298420|fedora1|multisystem-fedora|951Mio|
#MULTISYSTEM_MENU_DEBUT|09-03-2014-16:43:21-308201131|lubuntu-13.10-desktop-amd64.iso|multisystem-lubuntu|702Mio|
menuentry "lubuntu-13.10-desktop-amd64.iso" {
search --set -f "/lubuntu-13.10-desktop-amd64.iso"
loopback loop "/lubuntu-13.10-desktop-amd64.iso"
linux (loop)/casper/vmlinuz root=UUID=26C0-C39E debian-installer/language=cs keyboard-configuration/layoutcode=cz  iso-scan/filename=/lubuntu-13.10-desktop-amd64.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|09-03-2014-16:43:21-308201131|lubuntu-13.10-desktop-amd64.iso|multisystem-lubuntu|702Mio|
#MULTISYSTEM_MENU_DEBUT|09-03-2014-16:53:39-968442811|gparted1|multisystem-gparted|165Mio|
menuentry "gparted-live-0.16.2-11-i486.iso" {
linux /gparted1/live/vmlinuz root=UUID=26C0-C39E live-media-path=/gparted1/live boot=live config noswap nomodeset ip=frommedia nosplash lang=cs_CZ
initrd /gparted1/live/initrd.img
}
#MULTISYSTEM_MENU_FIN|09-03-2014-16:53:39-968442811|gparted1|multisystem-gparted|165Mio|
#MULTISYSTEM_MENU_DEBUT|10-03-2014-14:37:02-081675199|linux-secure-13.04-64bit.iso|multisystem-ubuntu_secured_remix|781Mio|
menuentry "linux-secure-13.04-64bit.iso" {
search --set -f "/linux-secure-13.04-64bit.iso"
loopback loop "/linux-secure-13.04-64bit.iso"
linux (loop)/casper//vmlinuz.efi root=UUID=26C0-C39E debian-installer/language=cs keyboard-configuration/layoutcode=cz  iso-scan/filename=/linux-secure-13.04-64bit.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|10-03-2014-14:37:02-081675199|linux-secure-13.04-64bit.iso|multisystem-ubuntu_secured_remix|781Mio|
#MULTISYSTEM_MENU_DEBUT|19-04-2014-14:49:00-429539519|ubuntu-14.04-desktop-amd64.iso|multisystem-ubuntu|964Mio|
menuentry "ubuntu-14.04-desktop-amd64.iso" {
search --set -f "/ubuntu-14.04-desktop-amd64.iso"
loopback loop "/ubuntu-14.04-desktop-amd64.iso"
linux (loop)/casper/vmlinuz.efi root=UUID=26C0-C39E debian-installer/language=cs keyboard-configuration/layoutcode=cz  iso-scan/filename=/ubuntu-14.04-desktop-amd64.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|19-04-2014-14:49:00-429539519|ubuntu-14.04-desktop-amd64.iso|multisystem-ubuntu|964Mio|
#MULTISYSTEM_MENU_DEBUT|23-04-2014-16:19:55-035858347|linuxmint-16-cinnamon-dvd-64bit.iso|multisystem-linuxmint|1194Mio|
menuentry "linuxmint-16-cinnamon-dvd-64bit.iso" {
search --set -f "/linuxmint-16-cinnamon-dvd-64bit.iso"
loopback loop "/linuxmint-16-cinnamon-dvd-64bit.iso"
linux (loop)/casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper locale=cs_CZ bootkbd=cz console-setup/layoutcode=cz console-setup/variantcode= iso-scan/filename=/linuxmint-16-cinnamon-dvd-64bit.iso noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|23-04-2014-16:19:55-035858347|linuxmint-16-cinnamon-dvd-64bit.iso|multisystem-linuxmint|1194Mio|
#MULTISYSTEM_MENU_DEBUT|11-06-2014-09:18:46-750036222|linux-secure-13.04-32bit.iso|multisystem-ubuntu_secured_remix|790Mio|
menuentry "linux-secure-13.04-32bit.iso" {
search --set -f "/linux-secure-13.04-32bit.iso"
loopback loop "/linux-secure-13.04-32bit.iso"
linux (loop)/casper//vmlinuz root=UUID=26C0-C39E debian-installer/language=cs keyboard-configuration/layoutcode=cz  iso-scan/filename=/linux-secure-13.04-32bit.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|11-06-2014-09:18:46-750036222|linux-secure-13.04-32bit.iso|multisystem-ubuntu_secured_remix|790Mio|
#MULTISYSTEM_MENU_DEBUT|11-06-2014-09:23:54-291524008|boot-repair-disk-32bit.iso|multisystem-lubuntu|495Mio|
menuentry "boot-repair-disk-32bit.iso" {
search --set -f "/boot-repair-disk-32bit.iso"
loopback loop "/boot-repair-disk-32bit.iso"
linux (loop)/casper/vmlinuz root=UUID=26C0-C39E debian-installer/language=cs keyboard-configuration/layoutcode=cz  iso-scan/filename=/boot-repair-disk-32bit.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|11-06-2014-09:23:54-291524008|boot-repair-disk-32bit.iso|multisystem-lubuntu|495Mio|
#MULTISYSTEM_MENU_DEBUT|01-10-2014-20:12:29-515803669|ubuntu-14.04.1-desktop-amd64.iso|multisystem-ubuntu|981Mio|
menuentry "ubuntu-14.04.1-desktop-amd64.iso" {
search --set -f "/ubuntu-14.04.1-desktop-amd64.iso"
loopback loop "/ubuntu-14.04.1-desktop-amd64.iso"
linux (loop)/casper/vmlinuz.efi root=UUID=26C0-C39E maybe-ubiquity debian-installer/language=cs keyboard-configuration/layoutcode=cz  iso-scan/filename=/ubuntu-14.04.1-desktop-amd64.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|01-10-2014-20:12:29-515803669|ubuntu-14.04.1-desktop-amd64.iso|multisystem-ubuntu|981Mio|
#MULTISYSTEM_MENU_DEBUT|09-10-2014-20:24:04-187631861|boot-repair-disk-64bit.iso|multisystem-lubuntu|507Mio|
menuentry "boot-repair-disk-64bit.iso" {
search --set -f "/boot-repair-disk-64bit.iso"
loopback loop "/boot-repair-disk-64bit.iso"
linux (loop)/casper/vmlinuz root=UUID=26C0-C39E maybe-ubiquity debian-installer/language=cs keyboard-configuration/layoutcode=cz  iso-scan/filename=/boot-repair-disk-64bit.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --
initrd (loop)/casper/initrd.lz
}
#MULTISYSTEM_MENU_FIN|09-10-2014-20:24:04-187631861|boot-repair-disk-64bit.iso|multisystem-lubuntu|507Mio|
#MULTISYSTEM_STOP
#Ne supprimez pas ce marqueur! / Do not remove this marker!
menuentry "______________Grub4Dos______________" {
echo
}
#http://grub4dos.sourceforge.net/
#http://grub4dos.sourceforge.net/wiki/index.php/Grub4dos_tutorial
menuentry "Grub4Dos" {
	linux /boot/grub.exe --config-file=/boot/grub/menu.lst
}
menuentry "______________Syslinux______________" {
echo
}
#solution tordue, mais qui passe partout ...
#menuentry "Syslinux" {
#search --set -f /boot/syslinux/redir.img
#	linux16 /boot/syslinux/memdisk
#	initrd16 /boot/syslinux/redir.img
#}
#http://syslinux.zytor.com
menuentry "Syslinux" {
search --set -f "/boot/syslinux/ldlinux.sys"
drivemap -s (hd0) $root
chainloader +1
}
#Autre solution pour chainer Syslinux via une copie du mbr
#dd if=/dev/sd?1 of=/media/multisystem/boot/img/syslinux.mbr bs=512 count=1
#menuentry "Syslinux" {
#search --set -f "/boot/img/syslinux.mbr"
#drivemap -s (hd0) $root
#chainloader /boot/img/syslinux.mbr
#}
menuentry "______________UTIL______________" {
echo
}
## for debugging set debug=efi
#menuentry "0-testfakebios" {
#	hexdump -s 0xc0000 (mem)
#	fakebios
#	hexdump -s 0xc0000 (mem)
## deliberate error to get wait for key
#	xxx
#}
#How to test GRUB 2 on Macbook
#http://grub.enbug.org/TestingOnMacbook
#
#http://wiki.gentoo.org/wiki/GRUB2
#
#menuentry "Windows 7 BIOS/MBR" {
#     insmod part_msdos
#     insmod ntldr
#     insmod ntfs
#     ntldr (hd0,msdos1)/bootmgr
#}
#menuentry "Windows XP BIOS/MBR" {
#     insmod part_msdos
#     insmod ntldr
#     insmod ntfs
#     ntldr (hd0,msdos1)/ntldr
#}
#
#chainer un autre grub
#menuentry "grub.cfg auf /dev/sdb1" {
#	configfile (hd1,1)/boot/grub/grub.cfg
#}
#menuentry "Chain other configfile" {
#configfile /boot/grub/grub-xxx.cfg
#}
#
#menuentry "Return default menu" {
#chainloader /boot/grub/boot.img
#}
#chainer win ou autre OS
#menuentry "Chainer UUID de la partition" {
#insmod=ntfs
#set root=(hd0,1)
#search --no-floppy --fs-uuid --set=root xxx-xxx
#	drivemap -s (hd0) $root
#	chainloader +1
#}
#http://www.plop.at/en/bootmanagerdl.html
menuentry "PLoP Boot Manager" {
	linux16 /boot/img/plpbt
}
#http://www.supergrubdisk.org/
#http://developer.berlios.de/project/showfiles.php?group_id=10921
#SG2D (Floppy, CD & USB in one)
#super_grub_disk_hybrid-1.98s1.iso
menuentry "Super Grub2 Disk" {
search --set -f /boot/img/sgdh.iso
	linux16 /boot/syslinux/memdisk
	initrd16 /boot/img/sgdh.iso
}
menuentry "Super Grub Disk" {
search --set -f /boot/img/sgdfr.img
	linux16 /boot/syslinux/memdisk
	initrd16 /boot/img/sgdfr.img
}
menuentry "Smart Boot Manager" {
search --set -f /boot/img/sbootmgr.dsk
	linux16 /boot/syslinux/memdisk
	initrd16 /boot/img/sbootmgr.dsk
}
#Site: http://boot.kernel.org/index.html
#Téléchargement: http://boot.kernel.org/gpxe_images/gpxe.lkrn
menuentry "BKO (boot.kernel.org)" {
	search --set -f /boot/img/gpxe.lkrn
	linux16 /boot/img/gpxe.lkrn
}
#http://www.memtest.org/#downiso
menuentry "memtest86+" {
	linux16 /boot/img/memtest86+.bin
}
menuentry "vbeinfo" {
	vbeinfo
read
}
menuentry "lspci" {
	lspci
read
}
menuentry "gfxpayload 640x480" {
set gfxpayload=640x480
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "gfxpayload 800x600" {
set gfxpayload=800x600
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "gfxpayload 1024x768" {
set gfxpayload=1024x768
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "gfxpayload 1280x1024" {
set gfxpayload=1280x1024
echo gfxpayload=${gfxpayload} press enter
read
}
menuentry "Reboot" {
insmod reboot
reboot
}
--------------------------------------------------------------------------------

======================= sdd1/boot/syslinux/syslinux.cfg: =======================

--------------------------------------------------------------------------------
default /boot/syslinux/vesamenu.c32
prompt 0
timeout 40
ontimeout 0

MENU TITLE MultiSystem LiveUSB
MENU DEFAULT 0

MENU BACKGROUND /boot/splash/splash.png

#Ne supprimez pas ce marqueur! / Do not remove this marker!
#MULTISYSTEM_START
#MULTISYSTEM_STOP
#Ne supprimez pas ce marqueur! / Do not remove this marker!

label 0
MENU LABEL PLoP Boot Manager
KERNEL /boot/img/plpbt

label 1
MENU LABEL Grub2
kernel /boot/syslinux/chain.c32 file=/boot/grub/boot.img

label 2
MENU LABEL Grub4Dos
kernel /boot/grub.exe

LABEL 3
MENU LABEL Hardware Detection Tool
KERNEL /boot/syslinux/hdt.c32

#Exemple pour booter un iso avec version recente de memdisk
#label 4
#MENU LABEL boot iso
#KERNEL /boot/syslinux/memdisk
#APPEND iso raw initrd=/g4u.iso

#LABEL 5
#KERNEL /boot/syslinux/memdisk
#APPEND initrd=freebsd.img floppy

#LABEL 6
#MENU LABEL Chainer win
#KERNEL /boot/syslinux/chain.c32 ntldr=/ntldr

#LABEL 7
#MENU LABEL Chainer partition 2
#kernel /boot/syslinux/chain.c32
#append hd0 2

--------------------------------------------------------------------------------

=================== sdd1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)


================= sdd1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)


============== sdd1: Version of COM32(R) files used by Syslinux: ===============

 boot/syslinux/chain.c32            :  COM32R module (v4.xx)
 boot/syslinux/hdt.c32              :  COM32R module (v4.xx)
 boot/syslinux/ifplop.c32           :  COM32R module (v4.xx)
 boot/syslinux/menu.c32             :  COM32R module (v4.xx)
 boot/syslinux/reboot.c32           :  COM32R module (v4.xx)
 boot/syslinux/vesamenu.c32         :  COM32R module (v4.xx)

=============================== StdErr Messages: ===============================

cat: /tmp/BootInfo-THBzNZho/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-THBzNZho/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-THBzNZho/Tmp_Log: No such file or directory
File descriptor 9 (/proc/14694/mounts) leaked on lvscan invocation. Parent PID 26300: bash
File descriptor 63 (pipe:[73335]) leaked on lvscan invocation. Parent PID 26300: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-10-10__05h26 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in live-session (Ubuntu 14.04.1 LTS, trusty, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=(loop)/casper/vmlinuz.efi root=UUID=26C0-C39E maybe-ubiquity debian-installer/language=cs keyboard-configuration/layoutcode=cz iso-scan/filename=/ubuntu-14.04.1-desktop-amd64.iso boot=casper file=/cdrom/preseed/ubuntu.seed noprompt quiet splash --

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sdb2:Ubuntu 14.04.1 LTS (14.04):Ubuntu:linux

=================== blkid:
/dev/loop0: LABEL="Ubuntu 14.04.1 LTS amd64" TYPE="iso9660"
/dev/loop1: TYPE="squashfs"
/dev/sda1: UUID="ce04715b-9a3a-418a-98cd-0ea46c1d3558" TYPE="ext4"
/dev/sda2: UUID="d4215a51-4d17-45ef-bf35-a61b8fa927b4" TYPE="ext4"
/dev/sdb2: UUID="a0c1c6e0-c9ca-47f2-a9ce-631f29671ab5" TYPE="ext4"
/dev/sdb3: UUID="e2ebf923-e9a4-4c20-93d3-e1830226842e" TYPE="ext4"
/dev/sdb4: UUID="1fb6bce6-e122-490b-add5-1b6d874fc267" TYPE="swap"
/dev/sdc1: UUID="abb509cb-c5fc-4729-83f3-a22b3fa87f6c" SEC_TYPE="ext2" TYPE="ext3"
/dev/sdc2: UUID="fbc64995-acbc-4013-8ef5-57e8a496d4cf" TYPE="swap"
/dev/sdc3: LABEL="OpenSUSE" UUID="b1e83165-7ef6-4cc1-997c-42661a897f47" TYPE="ext4"
/dev/sdc5: UUID="97b14d56-18ff-4acf-bfe2-f89d1e970518" TYPE="ext4"
/dev/sdd1: LABEL="MULTISYSTEM" UUID="26C0-C39E" TYPE="vfat"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.

Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== sdb2/etc/grub.d/ :
drwxr-xr-x  3 root root      4096 říj  3 17:15 grub.d
total 80
drwxr-xr-x 4 root root  4096 říj  3 13:25 backup
-rw-r--r-- 1 root root   483 kvÄ› 15 19:02 README
-rwxr-xr-x 1 root root  9424 kvÄ› 15 19:02 00_header
-rwxr-xr-x 1 root root  6058 kvÄ›  8 12:08 05_debian_theme
-rwxr-xr-x 1 root root 11608 kvÄ› 15 19:02 10_linux
-rwxr-xr-x 1 root root 10412 kvÄ› 15 19:02 20_linux_xen
-rwxr-xr-x 1 root root  1992 bře 12  2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 kvÄ› 15 19:02 30_os-prober
-rwxr-xr-x 1 root root  1416 kvÄ› 15 19:02 30_uefi-firmware
-rwxr-xr-x 1 root root   214 kvÄ› 15 19:02 40_custom
-rwxr-xr-x 1 root root   216 kvÄ› 15 19:02 41_custom




=================== sdb2/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT="0"
#GRUB_HIDDEN_TIMEOUT="10"
GRUB_HIDDEN_TIMEOUT_QUIET="true"
GRUB_TIMEOUT="10"
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL="console"

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE="640x480"

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID="true"

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

export GRUB_COLOR_NORMAL="yellow/black"
export GRUB_COLOR_HIGHLIGHT="magenta/black"


=================== No kernel in /isodevice/boot:
grub
grub.exe
img
kexec-loader.lst
multisystem.bs.save
polices
splash
syslinux


/isodevice/boot/grub/menu.lst detected
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda1.
sda2	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda2.
sdb2	: sdb,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sdb2.
sdb3	: sdb,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sdb3.
sdc1	: sdc,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sdc1.
sdc3	: sdc,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sdc3.
sdc5	: sdc,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sdc5.
sdd1	: sdd,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-kernel,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/isodevice.

sda	: GPT,	no-BIOS_boot,	has-no-EFIpart, 	not-usb,	no-os,	2048 sectors * 512 bytes
sdb	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	2048 sectors * 512 bytes
sdc	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	no-os,	2048 sectors * 512 bytes
sdd	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	liveusb,	no-os,	63 sectors * 512 bytes


=================== parted -l:

Model: ATA WDC WD3200AAKX-0 (scsi)
Disk /dev/sda: 320GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start   End    Size    File system  Name  Flags
1      1049kB  157GB  157GB   ext4               msftdata
2      157GB   210GB  52.4GB  ext4               boot


Model: ATA KINGSTON SVP200S (scsi)
Disk /dev/sdb: 60.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system     Flags
2      1049kB  31.0GB  31.0GB  primary  ext4            boot
3      31.0GB  51.4GB  20.3GB  primary  ext4
4      51.4GB  60.0GB  8640MB  primary  linux-swap(v1)


Model: ATA WDC WD5000AADS-0 (scsi)
Disk /dev/sdc: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
2      1049kB  10.5GB  10.5GB  primary   linux-swap(v1)
1      10.5GB  62.9GB  52.4GB  primary   ext3
3      62.9GB  115GB   52.4GB  primary   ext4
4      115GB   500GB   385GB   extended
5      115GB   220GB   105GB   logical   ext4


Model: ADATA USB Flash Drive (scsi)
Disk /dev/sdd: 32.3GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      32.3kB  21.7GB  21.7GB  primary  fat32        boot, lba

=================== parted -lm:

BYT;
/dev/sda:320GB:scsi:512:512:gpt:ATA WDC WD3200AAKX-0;
1:1049kB:157GB:157GB:ext4::msftdata;
2:157GB:210GB:52.4GB:ext4::boot;

BYT;
/dev/sdb:60.0GB:scsi:512:512:msdos:ATA KINGSTON SVP200S;
2:1049kB:31.0GB:31.0GB:ext4::boot;
3:31.0GB:51.4GB:20.3GB:ext4::;
4:51.4GB:60.0GB:8640MB:linux-swap(v1)::;

BYT;
/dev/sdc:500GB:scsi:512:512:msdos:ATA WDC WD5000AADS-0;
2:1049kB:10.5GB:10.5GB:linux-swap(v1)::;
1:10.5GB:62.9GB:52.4GB:ext3::;
3:62.9GB:115GB:52.4GB:ext4::;
4:115GB:500GB:385GB:::;
5:115GB:220GB:105GB:ext4::;

BYT;
/dev/sdd:32.3GB:scsi:512:512:msdos:ADATA USB Flash Drive;
1:32.3kB:21.7GB:21.7GB:fat32::boot, lba;


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdd1 on /isodevice type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /cdrom type iso9660 (ro,noatime)
/dev/loop1 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw)
/dev/sdb2 on /mnt/boot-sav/sdb2 type ext4 (rw)
/dev/sdb3 on /mnt/boot-sav/sdb3 type ext4 (rw)
/dev/sdc1 on /mnt/boot-sav/sdc1 type ext3 (rw)
/dev/sdc3 on /mnt/boot-sav/sdc3 type ext4 (rw)
/dev/sdc5 on /mnt/boot-sav/sdc5 type ext4 (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb2 sdb3 sdb4 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 sdc2 sdc3 sdc4 sdc5 size slaves stat subsystem trace uevent
/sys/block/sdd (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdd1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet char input kmsg kvm log lp0 mapper mcelog mem net network_latency network_throughput null parport0 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sdb sdb2 sdb3 sdb4 sdc sdc1 sdc2 sdc3 sdc4 sdc5 sdd sdd1 sg0 sg1 sg2 sg3 sg4 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom vga_arbiter vhci vhost-net zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sdd1
00000000  eb 58 90 4d 53 57 49 4e  34 2e 31 00 02 20 56 00  |.X.MSWIN4.1.. V.|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 3f 00 00 00  |........?...?...|
00000020  c1 6f 87 02 75 28 00 00  00 00 00 00 85 70 04 00  |.o..u(.......p..|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 9e c3 c0 26 4e  4f 20 4e 41 4d 45 20 20  |..)...&NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 fa fc 31 c9 8e d1  |  FAT32   ..1...|
00000060  bc 76 7b 52 06 57 1e 56  8e c1 b1 26 bf 78 7b f3  |.v{R.W.V...&.x{.|
00000070  a5 8e d9 bb 78 00 0f b4  37 0f a0 56 20 d2 78 1b  |....x...7..V .x.|
00000080  31 c0 b1 06 89 3f 89 47  02 f3 64 a5 8a 0e 18 7c  |1....?.G..d....||
00000090  88 4d f8 50 50 50 50 cd  13 eb 62 8b 55 aa 8b 75  |.M.PPPP...b.U..u|
000000a0  a8 c1 ee 04 01 f2 83 fa  4f 76 31 81 fa b2 07 73  |........Ov1....s|
000000b0  2b f6 45 b4 7f 75 25 38  4d b8 74 20 66 3d 21 47  |+.E..u%8M.t f=!G|
000000c0  50 54 75 10 80 7d b8 ed  75 0a 66 ff 75 ec 66 ff  |PTu..}..u.f.u.f.|
000000d0  75 e8 eb 0f 51 51 66 ff  75 bc eb 07 51 51 66 ff  |u...QQf.u...QQf.|
000000e0  36 1c 7c b4 08 e8 e9 00  72 13 20 e4 75 0f c1 ea  |6.|.....r. .u...|
000000f0  08 42 89 16 1a 7c 83 e1  3f 89 0e 18 7c fb bb aa  |.B...|..?...|...|
00000100  55 b4 41 e8 cb 00 72 10  81 fb 55 aa 75 0a f6 c1  |U.A...r...U.u...|
00000110  01 74 05 c6 06 46 7d 00  66 b8 80 f8 27 00 66 ba  |.t...F}.f...'.f.|
00000120  00 00 00 00 bb 00 80 e8  0e 00 66 81 3e 1c 80 ab  |..........f.>...|
00000130  26 71 6f 75 74 e9 f8 02  66 03 06 60 7b 66 13 16  |&qout...f..`{f..|
00000140  64 7b b9 10 00 eb 2b 66  52 66 50 06 53 6a 01 6a  |d{....+fRfP.Sj.j|
00000150  10 89 e6 66 60 b4 42 e8  77 00 66 61 8d 64 10 72  |...f`.B.w.fa.d.r|
00000160  01 c3 66 60 31 c0 e8 68  00 66 61 e2 da c6 06 46  |..f`1..h.fa....F|
00000170  7d 2b 66 60 66 0f b7 36  18 7c 66 0f b7 3e 1a 7c  |}+f`f..6.|f..>.||
00000180  66 f7 f6 31 c9 87 ca 66  f7 f7 66 3d ff 03 00 00  |f..1...f..f=....|
00000190  77 17 c0 e4 06 41 08 e1  88 c5 88 d6 b8 01 02 e8  |w....A..........|
000001a0  2f 00 66 61 72 01 c3 e2  c9 31 f6 8e d6 bc 68 7b  |/.far....1....h{|
000001b0  8e de 66 8f 06 78 00 be  da 7d ac 20 c0 74 09 b4  |..f..x...}. .t..|
000001c0  0e bb 07 00 cd 10 eb f2  31 c0 cd 16 cd 19 f4 eb  |........1.......|
000001d0  fd 8a 16 74 7b 06 cd 13  07 c3 42 6f 6f 74 20 65  |...t{.....Boot e|
000001e0  72 72 6f 72 0d 0a 00 00  00 00 00 00 00 00 00 00  |rror............|
000001f0  00 00 00 00 00 00 00 00  fe 02 b2 3e 18 37 55 aa  |...........>.7U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  1.7G  123M  1.6G   8% /
udev           devtmpfs   1.7G   12K  1.7G   1% /dev
tmpfs          tmpfs      345M  1.4M  343M   1% /run
/dev/sdd1      vfat        21G  8.6G   12G  43% /isodevice
/dev/loop0     iso9660    981M  981M     0 100% /cdrom
/dev/loop1     squashfs   939M  939M     0 100% /rofs
none           tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs      1.7G  1.2M  1.7G   1% /tmp
none           tmpfs      5.0M  4.0K  5.0M   1% /run/lock
none           tmpfs      1.7G   76K  1.7G   1% /run/shm
none           tmpfs      100M   64K  100M   1% /run/user
/dev/sda1      ext4       145G  112G   26G  82% /mnt/boot-sav/sda1
/dev/sda2      ext4        48G  574M   45G   2% /mnt/boot-sav/sda2
/dev/sdb2      ext4        29G  7.2G   20G  27% /mnt/boot-sav/sdb2
/dev/sdb3      ext4        19G  2.6G   16G  15% /mnt/boot-sav/sdb3
/dev/sdc1      ext3        48G   52M   46G   1% /mnt/boot-sav/sdc1
/dev/sdc3      ext4        48G   52M   46G   1% /mnt/boot-sav/sdc3
/dev/sdc5      ext4        96G   60M   92G   1% /mnt/boot-sav/sdc5

=================== fdisk -l:

Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x77b34896

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1   625142447   312571223+  ee  GPT

Disk /dev/sdb: 60.0 GB, 60022480896 bytes
255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0004074e

Device Boot      Start         End      Blocks   Id  System
/dev/sdb2   *        2048    60631039    30314496   83  Linux
/dev/sdb3        60635136   100354047    19859456   83  Linux
/dev/sdb4       100354048   117229567     8437760   82  Linux swap / Solaris

Disk /dev/sdc: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000a59a2

Device Boot      Start         End      Blocks   Id  System
/dev/sdc1        20482048   122882047    51200000   83  Linux
/dev/sdc2            2048    20482047    10240000   82  Linux swap / Solaris
/dev/sdc3       122882048   225282047    51200000   83  Linux
/dev/sdc4       225282048   976773119   375745536    5  Extended
/dev/sdc5       225284096   430084095   102400000   83  Linux

Partition table entries are not in disk order

Disk /dev/sdd: 32.3 GB, 32326663680 bytes
255 heads, 63 sectors/track, 3930 cylinders, total 63138015 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0006b38f

Device Boot      Start         End      Blocks   Id  System
/dev/sdd1   *          63    42430463    21215200+   c  W95 FAT32 (LBA)


=================== Final advice in case of recommended repair
Please do not forget to make your BIOS boot on sdb (60.0GB) disk!

=================== Default settings
Recommended-Repair
This setting would reinstall the grub2 of sdb2 into the MBRs of all disks (except USB without OS).
Grub-efi would not be selected by default because: no-win-efi
Additional repair would be performed: unhide-bootmenu-10s

=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.



Ve vašem počítači nebyla provedena žádná změna.